Zynq UltraScale+ Notes

Owned by Russell Joyce (Deactivated)
20 Sept, 2017
1 min read

Working with a Zynq UltraScale+ is slightly different to a Zynq-7000, and some steps are not currently documented well by Xilinx.

These pages contain notes from setting up Linux and PCIe on a ZCU102.

Unless otherwise stated, everything here based on Vivado 2017.2 and a ZCU102 Revision 1.0 board with ES2 silicon (EK-U1-ZCU102-ES2-G).