Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 13 Next »

This page explains how to use the Application Tracking tool, which contains daily updated data about Applications made to the University of York since 2011/12.

 

Contents:


 


Overview

The Application Tracking workbook contains data about applications, offers and acceptances for:

  • the current application cycle (data is refreshed daily overnight to show the close of business position for the previous day)
  • completed application cycles (when compared with the current cycle, data for the equivalent date is shown; otherwise the end of cycle position is shown)


The workbook replaces a number of previously published workbooks and spreadsheets:

  • Application Analysis (workbook showing Applications - current season)
  • UG applications and offers by programme, current season (weekly updated spreadsheet showing UG Applications)
  • PG applications by programme, current season (weekly updated spreadsheet showing PGT/PGR Applications) 
  • Application Overview (workbook showing Applications - complete seasons)
  • UG applications by programme, end of season (spreadsheet showing final UG Applications position)
  • PG applications by programme, end of season (spreadsheet showing final PGT/PGR Applications position) 

(Return to Top)


 

 

 

Data Terms contained in this Workbook

Work has begun on building a full data dictionary to:

  • ensure consistent field names and values are used within and across Tableau Workbooks,
  • provide clear definitions of each term used.

This guidance will be updated when the data dictionary is available.
Application Tracking - Guidance Notes

 

(Return to Top) 





Using the Workbook

All workbook tabs (views) have a header at the top of the screen, and a set of filters down the right-hand side:

 

The header contains:

  • view name,
  • help icon.
  • current filter values (displayed in orange)

The filter panel contains a number of options which determine or limit the data that is shown in the view.  Changes made to filters:

  • usually persist when you change to a different tab (where applicable) 
  • are shown in the header at the top of the screen

 

(Return to Top) 





Workbook Tabs:

1. Applications Overview

This view contains three separate charts, comparing the current application cycle with the equivalent point in previous cycles.

Changing the filters (in the right panel) affects all three charts.

Left PanelTop - Whole CycleBottom - Last 2 Weeks

The left panel compares the current number of applications, offers, live offers or UF acceptances (as selected in the filter panel) in the current cycle with:

  • the previous year
  • the average for the previous 3 years

This is shown as a colour-coded summary (with orange indicating departments where the current numbers are below the previous year(s).

The right-hand part of this panel shows a time series graph for the last 2 weeks, giving a closer view of how the current year data is varying from the previous year and 3-year average.

The top panel (under the header) shows the number of applications, offers, live offers or UF acceptances (as selected in the filter panel) on each day since the start of the 2012/13 cycle.

The bottom panel shows the number of applications, offers, live offers or UF acceptances (as selected in the filter panel) on each day in the last two weeks.

 

(Return to Top) 

 

 

 

 

 

2. By Department: 

This view shows a breakdown of applications and offers by department and fee status (home / overseas), allowing the comparison of the current cycle with previous cycles. 


(Return to Top) 

 

 

 

 


 3. UG by Programme: 

This view shows a breakdown of undergraduate applications and offers.

Using the "Select View" option in the Filters pane, you can switch between the following views:

  • Summary - Current Position
  • Summary - Final Position (NB the current cycle will not be shown)
  • Details - Current Position 

(Return to Top) 

 

 

 

 

 

4. PG by Programme: 

This view shows a breakdown of postgraduate (taught and research students) applications and offers.

Using the "Select View" option in the Filters pane, you can switch between the following views:

  • Summary - Current Position
  • Summary - Final Position (NB the current cycle will not be shown)
  • Details - Current Position 

 

(Return to Top) 

 

 

 

 

 

5. Domicile Report: 

This view shows applications and offers broken down by the applicants' country of domicile.

The Target Market? filter defaults to 'Y' as, usually, the International Office (within Student Recruitment) are only interested in students from a specific set of target domiciles.

The Region data item facilitates the grouping and filtering of domiciles into regions, as defined by the International Office.  Currently, only Target Market domiciles have been classified into regions; others appear as 'not classified'.

Using the "Select View" option in the Filters pane, you can switch between the following views which show either the current position or end-cycle position, broken down in the following ways:

  • by Domicle (current)
  • by Domicle, Dept (current)
  • by Dept, Domicle (current)
  • by Domicle (final)
  • by Domicle, Dept (final)
  • by Dept, Domicle (final)


(Return to Top) 

 

 

 

 

 

6. Application Overview Table (final position):

This view replicates the 'Table' view in the old Application Overview workbook and shows full cycle data, from applications to entrants, by cycle, level, fee status and course/programme. 

By changing the 'Show Additional Level' field you can switch between breaking down the data by Programme and by Course.

 

(Return to Top) 

 

 

 

 

 

7. By Characteristic View:

This view facilitates the comparison of applications, offers and acceptances, for the current year and previous years, by student characteristic (including WP characteristics):

  • gender (M/F/O)
  • age (mature?)
  • ethnicity (BME?)
  • socio-economic class (SEC 1-3 or 4-7?)
  • home region (within for UK domicile students)
  • low participation neighbourhood (LPN?)
  • school type (state/other)

Changing the characteristic allows the direct comparison of the number and percentage of applicants attributable to each value within the selected characteristic.


(Return to Top) 

 

 

 

 

Change Log:

(Return to Top)

21 Jan 2014 - version 3.10

Key changes:

  • Addition of "by Characteristic" view
  • Minor aesthetic changes to conform to BIU design standards

09 Jan 2014 - version 3.6

Key changes:

  • Reinstatement of Application Overview table
  • Redesign to conform to BIU Design Standards and addition of help links
  • Change of "arbitrary date" selector to static "final position" (end-cycle)
  • Addition of links to guidance notes on BIU wiki

 

20 Nov 2014 - version 3.5

Key changes:

  • Extra Domicile views (showing History).
  • Enhanced sparklines and more readable "daily trend" data
  • (Display of all programmes, even those with zero applications)
  • (Breakdown of PG by Qual Aim and also separation by PGCE)
  • (Addition of demographic breakdown tbc)

 

14 Nov 2014 - version 3.4

Key changes:

  • Combined Domicile views to a single tab; updated sparklines view.

 

12 Nov 2014 - version 3.3

Key changes:

  • Displayed Departments by Depts, IDC & Admission Entities throughout
  • Added 'Distance Learning' option to Mode of Study
  • Combined UG by progr summary (and detail) tabs and replicated for PG
  • Various minor aesthetic changes

 

10 Nov 2014 - version 3.2

Key changes:

  • Dashboard showing departmental sparklines (compared to 3 year average)

 

05 Nov 2014 - version 3.1

Key changes:

  • Improved response time (loading tabs)
  • Set default value for views to show position as of COB on previous day

 

03 Oct 2014 - version 2.10

Key changes:

  • Fixed BOXI report replacement (different York route codes were appearing in the same UCAS code groupings)
  • Split offers by C offers and U offers
  • Separated withdrawals into withdrawals-pre-offer and withdrawals-post-offer
  • Demographic information now available for all students (was previously unavailable from week 33 in 2013/4)
  • Corrected data error noted in "By Department" tab where data was being aggregated for each day in application cycle rather than showing position a final day in date range selected.
  • Added "AdmissionRoute" field/filter showing: "Main Cycle", "Clearing", "Adjustment", "RPA"
  • Improved display filters and removed colour coding in By Department View
  • Added Rejections (at outset / after offer conditions not met), declines and withdrawals to tabular views. Also added pending and the % difference
  • Added a weekly dashboard for departments to use (this could potentially be published to a separate workbook so that departments would not view the other tabs)
  • Added replica of DM's Boxi reports (sent to SMG)

 

10 Sep 2014 - version 2.0

Key changes:

1. Consolidated the following reports:

  • Applicant Tracking (Tableau)
  • Applicant Overview (Tableau)
  • PG Applications & UG Applications (Business Objects)
  • Additional reports used by DM to report to SMG

2. Correction of source data to "fill-in" gaps where snapshot did not take place

3. Separation of applications into: "standard" (current cycle), "deferred" and "in-cycle"

4. Addition of multiple filters/grouping options

 

23 January 2012 - First release

(Return to Top)

  • No labels