How to Use this Workbook

This workbook has a separate tabs for UG, PGT, PGR and IPC programmes. Each tab works basically the same way, though some filter options may not be available in all tabs (e.g. "Clearing" is not applicable to PGR).

Please note that the University of York handles admissions for English language pre sessionals and therefore these figures show on the UG and PG tabs.

By default, the workbook shows the most recent application data, as at the current point in the application cycle. For previous cycles, comparable data is shown at the equivalent date.

For example, on 8th October 2019, the most recent data for the 2020/21 cycle is the overnight position on 7th October 2019. The equivalent data for the 2019/20 and 2018/19 cycles is, respectively, the 7th October 2018 and 7th October 2017.

Using the Date Selection options you can:

Specify a different date in the application cycle to view data (for example, you can specify "03/10" if you wish to view current cycle data as at 3rd October 2019 (equivalent for previous cycles). Please note that when selecting a future date (for which data cannot be available) the workbook will instead show the latest data.
For previous cycles, choose to view the "End of Cycle" position rather than the equivalent position.

How to use the Data Filters and Display Options

Filter	Comments
Faculty Name All Arts/Hums Sciences Social Sciences	Faculty is preselected, based on admissions entity selected on the Applications Dashboard homepage.
Admissions Entity	NB IPC doesn’t feature in the Admissions Entity list. For IPC information, please see the relevant tab.
Programme	Note that there may be courses listed here that look live (as they have exiting students on them), but are not live in terms of taking new applications. Tip: you can search the filter by programme names (click on the drop-down and enter search criteria above the resulting list).
Applicant Category All E H O HCI	Prior to 2018/19 cycle, applicant category was not split by H and E, so if you are running a comparison with years previous to 2018/9, be aware you are not comparing like for like. Please note that you will need to combine H and EU to see where you are placed in relation to your UGH target. HCI = Home Channel Islands.
Mode of Study All Distance Full-time Other Part-time Mode unknown Visiting
Application Cycle Type (App Cycle Type) All Deferred from previous year In-year (PG only) Standard	Defaults to ‘All’. Standard = all applications made within the application cycle (e.g. for 2020/1 entrants, the application cycle runs from 1st October 2019 to 30 September 2020). Deferred from previous year = applications that were made prior to the start of the application cycle for the given academic year of entry (e.g. applications made for 2020/1 prior to 1st October 2019 are considered "deferred") In-year (PG only) = applications that were made after the end of the application cycle for the given academic year of entry (e.g. applications made for 2020/1 later than 30 September 2020 are considered "in-cycle")
Admission Route All Adjustment Clearing Main scheme RPA	Main scheme - describes any application that comes in before UCAS Extra starts. RPA - a ‘record of prior acceptance’ describes students haven’t applied via UCAS. We notify UCAS and the student immediately shows as UF on our systems.
Application Source All HEP IPC KICL YORK	Describes where the application process was initiated. HEP = Higher Education Partner (Distance Learning provision) IPC = International Pathway College (pre-sessional, foundation and pre-Masters programmes) KICL = the IPC's partner provider in London, with teaching provided by Kaplan York = All other applications not made through one of the above partners (e.g. UCAS and direct applications).
Split by Home/Overseas Yes No	Displays a separate block of columns for Home and Overseas applications (When "Yes" selected)
Choose a Date	Specify a different date in the application cycle to view data (for example, you can specify "03/10" if you wish to view current cycle data as at 3rd October 2019 (equivalent for previous cycles). Please note that when selecting a future date (for which data cannot be available) the workbook will instead show the latest data.
For Previous Cycles Show	Choose to view the "End of Cycle" position - for previous cycles - rather than the equivalent position.
Show Faculty	Break results down by Faculty
Show Admissions Entity	Break results down by Admissions Entity
Show Programme	Break results down by Programme Name
Academic Year of Entry	Choose which Academic Years (application cycles) are displayed

Remember to check the text summary of the filters you have selected to ensure you have the data you require.

Browser not supported